Single part body, mechanically-spliced wire rope slings
Eyes are typically formed
using a flemish eye splice.
The ends are secured by
pressing a metal sleeve over the
ends of the strands of the splice.
Pull follows a direct line along
the center of the rope and
eye. Single part body
mechanical splice slings
have a higher rated
capacity than handspliced slings.
115 IWRC
All capacities in tons of 2,000 lbs. All eye and fitting dimensions in inches.
* Rated Capacities Basket Hitch based on D/d Ratio of 25.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter.
Rated Capacities based on design factor of 5. Horizontal sling angles less than 30° shall not be used.
** Working Load Limit, based on standard carbon fittings unless noted otherwise.
*** See Choker Hitch Rated Capacity Adjustment on page 7.