Industrial Supplies Brevard County

Crosby® Alloy Bolt Type Shackles

G-209A

Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C271F Type IVA, Grade B, Class 2, except for those provisions required of the contractor. For additional information, see page 452.

• Capacities 2 thru 21 metric tons. Meets performance requirements of Grade 8 shackles.
• Forged Alloy Steel – Quenched and Tempered, with alloy pins.
• Working Load Limit permanently shown on every shackle.
• Hot Dip Galvanized.
• Shackles can be furnished proof tested with certificates to designated standards, such as
ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available
when requested at the time of order.
• Approved for use at -40 degree C (-40 degree F) to 204 degree C
(400 degree F).
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility,
design factor, proof load and temperature requirements. Importantly, these shackles
meet other critical performance requirements including impact properties and material
traceability, not addressed by ASME B30.26.

G-209A Alloy Screw Pin Shackles

* Maximum Proof Load is 2 times the Working Load Limit (metric tons) and 2.2 times the Working Load Limit (short tons). Minimum Ultimate Strength is 4.5 times the Working Load Limit for metric tonnes,and 5 times the Working Load Limit for short tons. For Working Load Limit reduction due to side loading applications, see page 94.

G-2169

G-2169

• Capacities of 7, 12.5 and 18 metric tons.
• Quenched and Tempered for maximum strength.
• Forged Alloy Steel.
• Available in galvanized and self colored finish.
• Individually proof tested and magnetic particle inspected. Crosby
certification available at time of order.
• Meets or exceeds all requirements of ASME B30.26 including
identification, ductility, design factor, proof load and temperature
requirements. Importantly, these shackles meet other critical
performance requirements including fatigue life, impact properties
and material traceability, not addressed by ASME B30.26.
• Look for the Red Pin® . . . the mark of genuine Crosby quality.

G-2169 / S-2169 Alloy Screw Pin "Wide Body" Shackles

* Ultimate Load is 5 times the Working Load Limit. Proof Load is 2 times the Working Load Limit.